The short answer
Keep the Heat On
Set your thermostat to at least 55 degrees Fahrenheit, even when you are away for a few days. This keeps the indoor air warm enough to prevent water inside pipes from freezing. A lower setting risks freezing, especially in exterior walls or unheated areas.
Keep the heat on consistently during winter months, especially if you live in a cold climate. Cold spells can last for days, and a warm home is your first defense. Also, open cabinet doors under sinks to let warm air circulate around the pipes, especially in kitchens and bathrooms.
Insulate Exposed Pipes
Wrap exposed pipes in foam insulation sleeves, available at hardware stores. Focus on pipes in unheated spaces like basements, attics, garages, and crawl spaces. Pay attention to pipes near exterior walls, as they are more prone to freezing.
For extra protection, use heat tape or heat cables on particularly vulnerable pipes. Follow the manufacturer's instructions carefully to avoid overheating. Insulation slows heat loss, but it does not add heat, so combine it with the heating tips above for sensible results.
- Check for drafts around pipe entry points
- Seal gaps with caulk or spray foam
- Insulate both hot and cold water lines
- Wrap pipes in unheated areas first
- Use foam sleeves for easy installation
- Inspect insulation for damage each winter
Let Faucets Drip
When temperatures drop below freezing, let a faucet drip slowly. Moving water is less likely to freeze than standing water. Drip the faucet farthest from the main water line to keep water flowing through the whole system.
A slow drip is enough, about a trickle the width of a pencil lead. Collect the water in a bucket to use for plants or cleaning. This simple step relieves pressure in the pipes, which reduces the risk of bursting even if ice does form.
Know Your Shutoff Valve
Find your main water shutoff valve now, before an emergency happens. It is often located where the water line enters your home, such as a basement or crawl space. Write down its location and keep it handy for all household members.
If a pipe does burst, shutting off the water quickly limits damage. Turn off the valve and open all faucets to drain the system. Then, call local water damage pros to handle the cleanup and drying. Acting fast can reduce the extent of water damage.
When a Burst Happens
If a pipe bursts, shut off the water immediately and turn off the electricity in the affected area if it is safe to do so. Avoid touching standing water if there is any risk of electrical shock. See a doctor if you feel unwell after cleanup.
The pros can handle water extraction, structural drying, and repairs. They can also inspect for hidden moisture and map affected areas. Policies vary, and your insurer decides what is covered. Check your policy to understand your options for water damage claims.
- Shut off the main water valve
- Turn off electricity in the flooded area
- Move rugs and furniture to dry spots
- Mop up standing water carefully
- Open windows to aid air circulation
- Call the pros for thorough drying
Talk to someone now
Call (414) 348-0250 any time, day or night, and describe what happened.
Call Now (414) 348-0250Frequently asked questions
What temperature should I keep my home to prevent pipe freezing?
Set your thermostat to at least 55 degrees Fahrenheit, even when away. This is a safe minimum to keep pipes from freezing. For extra safety, keep it higher if you have pipes in exterior walls or unheated spaces.
Should I drip both hot and cold water faucets?
Yes, drip both hot and cold water faucets, as both types of pipes can freeze. A slow trickle from each is enough. Focus on faucets farthest from the main line to encourage water movement throughout the entire system.
What should I do if a pipe freezes but has not burst?
Keep the faucet open to relieve pressure. Gently warm the pipe with a hairdryer or heat lamp, starting from the faucet side. Never use an open flame. If you cannot thaw it, call a plumber for help.