Phone answered 24/7 · Milwaukee, WI and nearby communities

Call 24/7: (414) 348-0250
Kinnickinnic River Water Damage HelpMilwaukee, WI · Answered 24/7

What Causes Chimney Fires in Homes?

Last updated October 31, 2026

The short answer

Creosote Buildup Is the Main Culprit

When wood burns, it releases smoke that cools as it rises through the chimney. That cooling turns the smoke into a sticky tar called creosote. Over time, creosote layers harden into a dark, crusty coating on the flue walls. A single hot fire can ignite that coating, and the resulting fire can reach extremely high temperatures.

Creosote forms faster when you burn unseasoned wood, restrict the air supply, or run a slow, smoldering fire. Cooler flue temperatures make the smoke condense more quickly. You can slow the buildup by burning only seasoned hardwood, giving the fire enough air, and keeping the fire hot and bright. A chimney professional can also inspect the flue to check for creosote levels.

  • Burn seasoned wood with low moisture content
  • Avoid smoldering fires that produce heavy smoke
  • Use the right size logs for your fireplace
  • Keep the damper fully open while burning
  • Have the chimney cleaned before each heating season

Cracked Flue Tiles and Damaged Liners

The flue liner is the inner layer of your chimney that contains the heat and smoke. If it cracks, gaps, or shifts, heat can reach the wood framing of your house. That can start a fire even without heavy creosote buildup. Damage often comes from age, weather, or a previous chimney fire that weakened the liner.

You can't always see flue damage from the fireplace opening. A chimney professional uses a camera or mirror to inspect the full length of the flue. If you notice crumbling mortar, loose bricks, or a strange odor after a fire, that can signal liner trouble. Repairing a damaged liner is a job for a qualified professional, not a DIY project.

Blockages from Nests and Debris

Birds, squirrels, and other animals sometimes build nests inside chimneys. Leaves, twigs, and even old mortar chunks can also fall in and block the flue. When the chimney is blocked, smoke and heat have nowhere to go. That trapped heat can ignite nearby materials or force smoke back into your living space.

A chimney cap with a mesh screen helps keep animals and debris out. You should also look up the chimney from the fireplace and check for visible blockages before lighting a fire. If you hear scratching or see nesting material, call a professional to remove it safely. Never try to burn out a blockage, as that can cause a dangerous fire.

Improper Burning Practices

How you use your fireplace directly affects fire risk. Burning trash, cardboard, or treated lumber releases chemicals that create rapid creosote buildup. Using flammable liquids to start a fire can cause a sudden flare-up that ignites creosote. Even overloading the firebox with too much wood can push flames high into the flue.

Stick to dry, natural firewood and build fires with kindling and newspaper. Keep the fire small and controlled, and never leave it unattended. If you use a wood stove, follow the manufacturer's instructions for fuel and air settings. Good burning habits reduce creosote and lower the chance of a chimney fire.

Signs You Had a Chimney Fire

You might not realize a chimney fire happened until later. Loud cracking or popping noises, a low rumbling sound, or dense smoke coming from the fireplace are common signs. You may also see flames shooting from the top of the chimney or notice a strong, hot smell. Some chimney fires burn slowly and cause damage without obvious signs.

After any suspected chimney fire, stop using the fireplace and have the chimney inspected by a professional before lighting another fire. Look for signs like distorted or discolored flue tiles, cracked bricks, or a puffy creosote appearance. A professional can assess the damage and advise on necessary repairs. If you feel unwell from smoke exposure, see a doctor.

  • Loud cracking or popping sounds
  • Dense smoke entering the room
  • Flames visible from the chimney top
  • Strong, hot, or acrid smell
  • Discolored or warped flue tiles
  • Cracked or shifting bricks on the chimney exterior

Water damage does not wait

Call (414) 348-0250 any time, day or night, and describe what happened.

Call Now (414) 348-0250

Frequently asked questions

How often should a chimney be cleaned?

Have a professional inspect and clean your chimney at least once a year, ideally before the heating season. If you burn wood frequently or use a wood stove, you may need cleaning more often. The cost depends on your chimney's condition, location, and accessibility, so ask for a price before scheduling.

Can a homeowner put out a chimney fire?

Do not try to put out a chimney fire yourself. Call the fire department immediately and get everyone out of the house. Close the fireplace damper if you can do so safely, but never go onto the roof. The fire department can extinguish it and check for structural damage.

Does homeowners insurance cover chimney fire damage?

Policies vary, and your insurer decides what is covered. Many standard policies cover fire damage, but some exclude damage from neglected maintenance, like failing to clean the chimney. Check your policy and talk to your insurance company about what your plan includes. Keep records of chimney inspections and cleanings.

Call Now (414) 348-0250