The short answer
Step 1: Stop the Water
Before you ventilate, you need to stop the water from coming in. Check the roof for missing shingles, look at the flashing around chimneys and vents, and inspect any pipes that run through the attic. A leaking roof or a burst pipe can keep adding moisture faster than fans can remove it.
If you find a pipe leak, shut off the water supply to that line and call a plumber. For a roof leak, a roofer can patch the area or replace damaged shingles. Until the source is fixed, ventilation alone will not solve the problem.
If you live in Milwaukee, keep your shutoff valve location written down.
- Check the roof for damaged shingles or gaps
- Inspect flashing around chimneys and vents
- Look for wet spots on rafters and insulation
- Trace any water stains to their source
- Turn off the water if a pipe is leaking
Open Windows and Use Fans
Once the water source is stopped, open every attic window you can. Cross ventilation works well, so open windows on opposite sides of the attic. Place a box fan in one window blowing outward to pull humid air out, and another fan near the opposite side blowing inward to bring in fresh air.
Run the fans for several hours or even a full day, depending on how wet the attic is. If the outside air is humid, ventilation alone may not dry things fast. In that case, a dehumidifier in the attic can remove moisture from the air while the fans keep it moving.
Keep the attic door open too, so air can flow from the living space below if it is drier than the outside air.
Remove Soaked Insulation
Wet insulation loses its ability to keep heat in and can hold moisture for weeks. If the insulation is fiberglass batts that are soaked, pull them out and bag them for disposal. Blown-in cellulose insulation that is wet usually needs to be vacuumed out completely.
Wear gloves, a dust mask, and long sleeves when handling wet insulation. It can harbor mold and irritate your skin. After removing it, let the attic floor and rafters air out before you put in new insulation.
You can dry some lightly dampened fiberglass batts if they are only slightly wet, but anything soaked should go.
- Bag wet fiberglass batts for trash
- Vacuum out soaked cellulose insulation
- Wear gloves and a dust mask
- Let the attic floor dry completely
- Replace insulation only after everything is dry
Dry the Wood Structure
The rafters, roof sheathing, and attic floor can hold a lot of water. After you remove wet insulation, aim fans at the wood surfaces and let them dry for at least 24 to 48 hours. Check for dark spots or a musty smell, which can mean mold is starting to grow.
If the wood feels damp after a couple of days, you may need a dehumidifier running continuously in the attic. A wet attic in a humid climate can take a long time to dry on its own, so be patient and keep the air moving.
Do not paint or seal any wood until it is fully dry, or you can trap moisture inside.
When to Call the Pros
If the attic has been wet for more than a day or two, or if you see mold growing, it is time to call local water damage pros. They have industrial fans, dehumidifiers, and moisture meters to find hidden wet spots in walls and under floors. They can also remove and replace wet insulation safely.
Water damage that reaches drywall or flooring may need more than just ventilation. The pros can dry the structure and help you decide what needs to be torn out and replaced. If you notice a musty smell that will not go away, or if you feel unwell from mold exposure, see a doctor.
Policies vary, and your insurer decides what is covered.
- Water has been sitting for more than 48 hours
- You see or smell mold
- Insulation is soaked through
- The wood structure feels damp after drying
- You cannot find the water source
- The attic is very large or hard to reach
Water damage does not wait
Phones are answered 24/7 for Milwaukee and nearby communities.
Call Now (414) 348-0250Frequently asked questions
How long does it take to dry a wet attic?
With good airflow and dry outside air, a lightly wet attic may dry in 1 to 2 days. If insulation is soaked or the wood is saturated, it can take several days or longer. Using fans and a dehumidifier speeds things up, but deep moisture may require professional equipment.
Can I use a regular house fan to ventilate my attic?
Yes, a regular box fan or floor fan can help move air. Place it in a window blowing outward to pull humid air out. You may need two or three fans for a larger attic. A dehumidifier also helps if the outside air is humid.
What if I see mold in my wet attic?
Mold in a wet attic is a sign that moisture has been present for a while. Small spots you can clean with a mild detergent, but larger areas or mold inside walls need a mold professional. Avoid stirring up mold spores, and see a doctor if you feel unwell.