Phone answered 24/7 · Milwaukee, WI and nearby communities

Call 24/7: (414) 348-0250
Kinnickinnic River Water Damage HelpMilwaukee, WI · Answered 24/7

How Do You Dry a Home After Flooding?

Last updated October 31, 2026

The short answer

Remove Standing Water First

The first step is to get rid of any standing water. Use a submersible pump for deep water or a wet/dry vacuum for shallow puddles. If the water is contaminated, wear rubber boots and gloves. Do not enter a flooded room if the water touches electrical outlets or if you smell gas; turn off the power at the main breaker if safe to do so.

Once the water is gone, check for hidden pockets in crawl spaces or under floors. Pay attention to saturated drywall and insulation, which can hold water for weeks. Keep a list of emergency numbers handy, including your utility company and a water damage restoration service.

  • Use a pump for deep water
  • Wet/dry vacuum for shallow puddles
  • Turn off power if safe
  • Wear protective gear
  • Check crawl spaces and under floors

Set Up Airflow and Dehumidifiers

After removing standing water, increase airflow throughout the home. Open windows and doors on opposite sides to create a cross-breeze. Place box fans in windows facing outward to pull humid air out. Use a dehumidifier in the wettest rooms, emptying the reservoir regularly or connecting a hose to a drain.

Run fans and dehumidifiers continuously for several days. Keep closet doors open and remove baseboards to allow air behind them. If you have central air conditioning, use it to dehumidify, but lower the temperature to avoid condensation. In humid summer weather, a dehumidifier may be the right tool for the job.

Strip Out Water-Damaged Materials

Wet carpet, padding, and drywall can become a breeding ground for mold within 24 to 48 hours. Remove these materials promptly, cutting drywall at least a foot above the water line. Dispose of them properly, as they cannot be effectively dried. Leave the framing to dry, but inspect for mold growth.

Wood studs and subfloors can often be saved if they dry slowly. Use a moisture meter to check their moisture content; below 15 percent is a good target. If you are unsure about which materials to keep, a water damage inspection can help you decide.

Dry the Structure Slowly and Safely

Drying a home is a gradual process. Rapidly heating the air can cause wood to crack and warp, so keep the temperature moderate. Use dehumidifiers to pull moisture from the air rather than relying solely on heat. Open wall cavities by removing baseboards and drilling small holes in plaster to allow air circulation.

Monitor the drying progress daily. If you notice a musty smell, that is a sign of mold or mildew. Clean affected surfaces with a mild detergent and water, then dry them thoroughly. For large areas, consider hiring a professional water damage service that has industrial dehumidifiers and moisture meters.

When to Call the Pros

If the flood water was deep, contaminated, or has been sitting for more than a day, the drying process is more complex. Local water damage pros can use structural drying equipment that reaches behind walls and under floors. They also have the training to handle hazardous materials safely.

Calling the pros early can prevent further damage and health risks. They can assess the extent of the damage and create a drying plan. Also, contact your insurance company to see what is covered. Policies vary, and your insurer decides what is covered.

Need help right now?

Water keeps spreading into floors and walls, so it is worth acting early. Calls are answered 24/7.

Call Now (414) 348-0250

Frequently asked questions

How long does it take to dry a house after a flood?

Drying can take from a few days to several weeks, depending on the extent of water damage, humidity levels, and how quickly you act. With good airflow and dehumidifiers, you may see significant progress in a week. But hidden moisture in walls can take longer.

Can I use heaters to dry out my home faster?

Heaters can help, but they should be used with dehumidifiers. High heat alone can cause wood to crack and may dry the surface while leaving moisture trapped inside. Keep the temperature moderate and use fans to circulate air.

What should I do with wet documents and photos?

Separate wet papers and place them flat on a clean surface or freeze them to prevent mold growth. Do not let them dry in a pile. For important items, a document drying service can restore them. Act quickly, as mold can ruin them within days.

Call Now (414) 348-0250