The short answer
Act Fast to Give Your Devices a Chance
The first step is to unplug the device and remove any batteries or power cords. Do not press the power button to test it. Water and electricity are a dangerous mix, and turning on a wet device can cause further damage. If the device was plugged in when it got wet, flip the circuit breaker if it is safe to do so, and call an electrician if you are unsure.
Remove the device from the water source and place it on a dry, absorbent towel. Gently shake out any excess water, but do not use a hair dryer or heat gun. Heat can warp plastic parts and push water deeper into the components. Instead, let the device sit in a warm, dry room with good airflow. A fan can help circulate air, but keep it at a distance. The faster you act, the better the chances of saving the device.
- Unplug and remove batteries right away
- Do not power on the device to test it
- Shake out excess water gently
- Place on a dry towel in a ventilated area
- Avoid heat sources like hair dryers
What to Do with Different Types of Electronics
Small gadgets like smartphones and tablets can sometimes be saved if you act quickly. Remove the SIM card and any memory cards, then dry the outside with a soft cloth. For internal moisture, you can place the device in a sealed container with silica gel packets or uncooked rice, but that takes days. A better approach is to let a pro with proper drying equipment handle it. The outcome depends on how long the device stayed wet and what type of water it was exposed to.
- Smartphones: remove SIM and memory cards
- Laptops: detach the hard drive if possible
- Desktops: open the case for airflow
- TVs and monitors: unplug and let dry completely
- Game consoles: remove discs and controllers
Why You Should Not Turn It on Too Soon
The biggest mistake is turning on a wet device to see if it works. Water can short-circuit the internal components, and even a tiny drop in the wrong place can cause permanent damage. Waiting a few days might feel like forever, but it is better than risking a fried motherboard. The rule of thumb is to wait at least 48 to 72 hours, but the actual time depends on the device and humidity level.
When to Call in the Pros for Electronics
If the device is expensive, contains irreplaceable data, or has been submerged for more than a few minutes, consider calling in the pros. Local water damage pros have specialized drying chambers and tools to disassemble devices and clean corrosion. They can also inspect for hidden water that could cause problems later, like rust on internal connectors. This is not a DIY job for most people.
Before you call, back up any data you can. If the device is a phone, try to save the memory card or cloud backups. For computers, remove the hard drive and see if it can be read in another machine. The pros can sometimes recover data, but it is not always possible. Be honest about what happened and how long the device was wet. That information helps them decide what to try.
How to Prevent Future Water Damage to Electronics
Prevention is easier than recovery. Keep electronics away from windows, sinks, and areas where leaks are common. Use surge protectors and consider water leak detectors near appliances and water heaters. If you have a basement or crawlspace, check for moisture regularly. In cold climates, melting snow and spring rains can cause small leaks that go unnoticed until they reach your electronics.
If you have a water damage inspection done on your home, a pro can spot potential problem areas before they cause trouble. That includes checking roof flashing, plumbing connections, and sump pumps. For extra protection, store important devices in waterproof cases or elevated shelves. If a leak does happen, you will have a better chance of saving your gear if you know where the shutoff valve is and act fast.
Talk to someone now
Water keeps spreading into floors and walls, so it is worth acting early. Calls are answered 24/7.
Call Now (414) 348-0250Frequently asked questions
How long does it take to dry out a wet phone?
It depends on the phone and the humidity level. In a dry room with good airflow, it can take 48 to 72 hours. Using a dehumidifier or silica gel can speed it up. Do not rush it. Turning it on too soon can cause permanent damage.
Can I use a hair dryer to dry my electronics?
No. Heat from a hair dryer can warp plastic parts and push water deeper into the device. It can also damage the battery or cause a fire risk. Use a fan or let it air dry in a warm, dry place instead.
Will my insurance cover water-damaged electronics?
Policies vary, and your insurer decides what is covered. Some home insurance policies cover sudden water damage, but not gradual leaks. Check your policy and document the damage with photos. If you have a claim, keep receipts for the devices.